1036303-T01-A
K-
INSTALLATION INSTRUCTIONS
1491T/K-1676T/K-18922T/K-18401T
PILLOW
BEFORE YOU BEGIN
BEFORE YOU BEGIN
-1-
·
·
·
·
·
·
Please read these instructions carefully to
familiarize yourself with the required tools, materials,
and installation sequences. Follow the sections that
pertain to your particular installation. This will help
you avoid costly mistakes. In addition to proper
installation, read all operating and safety instructions.
All information is based on the latest product
information available at the time of publication.
Kohler China Ltd. reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
These instructions contain important care, cleaning,
and warranty information-
please leave these
instructions for the consumer.
INSTALLATION
·
·
·
·
·
·
Clean the bath surface to remove any soap film or
oils.
Two or three suction cups are located on the back of
the pillow. Place the pillow on a appropriate position
rear to the rear rim of the bath, in order to make
figure of the pillow fit to the surface of the bath, and
press firmly with the heel of your hand at the suction
cup locations.
Check to make sure that the pillow is attached firmly
to the bath.
For best attachment to the bath surface,
moisten the back surface of the pillow at the suction
cup locations. Detach the pillow by lifting it off the bath
surface.
Do not
submerge the pillow, or use it as a seat cushion.
NOTE:
CAUTION: Risk of product damage.
1056326-T01-C
Suction Cup
K-1491T
K O
H L
E R
K-18401T
K-1676T
KOHLER
K-18922T
, 2008
ã
Copyright Kohler China Ltd., 2008
ã
368
201419
