Product Information
Applicable product:
Custom bath whirlpool with heater – drop-in
K-1144-HD
Fixture*:
Bathing well:
Basin area, bottom
49
″
(124.5 cm) x 39
″
(99.1 cm)
Basin area, top
62
″
(157.5 cm) x 47
″
(119.4 cm)
Weight
94 lbs (42.6 kg)
To overflow:
Water depth
15-1/2
″
(39.4 cm)
Capacity
96 gal (363.4 L)
* Approximate measurements for comparison only.
V
Hz
A
Pump: 1-speed
120
60
7.5
Heater: 1.5 kW
120
60
12.5
Minimum access panel
pump/control (required):
20
″
(50.8 cm) W x
15
″
(38.1 cm) H
Required Electrical Service (2 required)
Two dedicated circuits required, each protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
120 V, 15 A, 60 Hz
Heater
120 V, 15 A, 60 Hz
Locate the outlets behind the whirlpool and within 24
″
(61 cm)
of the pump and heater.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
37 lbs/square foot (182 kg/square meter) loading.
Pump must be relocated to custom position at the time of
installation. Provide adequate clearance.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
Drop-in Rim Detail
1-1/2"
(3.8 cm)
28-1/2" (72.4 cm)
Cut-out Detail
2-7/8"
(7.3 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
1-1/2" OD
1/2" (1.3 cm)
60" (152.4 cm)
30" (76.2 cm)
13-1/8"
(33.3 cm)
40" (101.6 cm)
4-7/8"
(12.4 cm)
58-1/2"
(148.6 cm)
30" (76.2 cm)
35-1/4" (89.5 cm)
Pump/Control
Access
20-1/4"
(51.4 cm) 18-3/4"
(47.6 cm)
60"
(152.4 cm)
35-1/4"
(89.5 cm)
63"
(160 cm)
135˚
135˚
No change in measurements if connected
with drain illustrated. (K-11677 or K-11677M)
1012966-1-D
2
Kohler Co.
