Product Information
Applicable product:
Drop-in rim style
K-1124-G
Fixture*:
Bathing well
Basin area bottom
51-3/8
″
(130.5 cm) x 21
″
(53.3 cm)
Basin area top
64-1/2
″
(163.8 cm) x 30-1/2
″
(77.5 cm)
Weight
100 lbs (45.4 kg)
To overflow
Water depth
15
″
(38.1 cm)
Capacity
72 gal (273 L)
* Approximate measurements for comparison only.
Drop-in cutout dimensions:
70-1/2
″
(179.1 cm) x 34-1/2
″
(87.6 cm)
Blower motor:
Heater
V
Hz
A
1 hp
300 W
120
60
5
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Blower motor:
120 V, 15 A, 60 Hz
Blower motor is supplied with a 24
″
(61 cm) grounding-type
plug-in cord.
Notes
Install this product according to the installation guide.
Floor support under product must provide for a minimum of
41 lbs/square foot (197 kg/square meter).
This product is designed for drop-in installation only. It is not
suited for use in a three-wall alcove with overhead shower.
The hot water supply should be 70% of capacity or greater.
Installations will vary.
A blower motor access panel is required.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
No change in measurements if connected
with drain illustrated. (K-7272)
36" (91.4 cm)
72" (182.9 cm)
11-1/4"
(28.6 cm)
3/4" (1.9 cm)
19"
(48.3 cm)
2-1/2"
(6.4 cm)
1-1/2" OD
18"
(45.7 cm)
1-1/2"
(3.8 cm)
Drop-In
Rim Detail
Blower Motor Access
20" (50.8 cm) W x
15" (38.1 cm) H
1-1/4"
(3.2 cm)
1064190-1-B
2
Kohler Co.
