background image

-1-

BEFORE YOU BEGIN

安装之前

ZHONGSHAN KOHLER SHOWER CO., LTD.     NO13-1, XINGYE ROAD, ZHONGSHAN TORCH 

DEVELOPMENT ZONE, ZHONGSHAN, GUANGDONG, CHINA     POST CODE: 528437

中山科勒卫浴有限公司

 

广东省中山市中山火炬开发区兴业路

 13-1 

 

邮编:

528437

• 

说明书中所有的资料是按最新出版的产品资料编写而成。科

勒中国有限公司保留任何时候无须通知即可改变产品特性、

包装或产品可供类型的权利。

• 

说明书包括重要的安装、清洁及保养方面的内容,

请把这些

资料交给用户阅读,保管。

• 

确保在安装淋浴房之前已经完整正确地安装了浴室和完工

墙面材料。淋浴区墙地面应做防水处理,并不得布置有电器

开关、插座。确保地面排水通畅。

• 

在进行淋浴房安装之前,请拿出、排列并确认所有的零部件。

请参考第

 2 

页上所示的分解图。

• 

对尺寸与本标准产品不同的定制淋浴房,参照本说明书进行

安装。

• 

本产品符合

 QB 2584-2007

• 

All information is based on the latest product information 

available at the time of publication. Kohler China Ltd. 

reserves the right to make changes in product 

characteristics, packaging, or availability at any time 

without notice.

• 

These instructions contain important care, cleaning, and 

warranty information-

please leave these instructions for 

the consumer.

• 

Make sure that the bath and the finished wall material are 

completely and correctly installed prior to installing your 

shower door. Prepare waterproof layer to wall and floor of 

the showering area. It is not allowed for any presence of 

electric switches and sockets. Make sure the floor drain 

runs smoothly.

• 

Before starting the door installation, lay out and identify all 

the parts. Use the exploded view illustrated on page 2 for 

reference.

• 

For the installation method of customized shower with 

different dimensions, please refer to this instructions.

• 

The product complies with QB 2584-2007.

警告:可能有人员伤害或者产品损坏的危险。

钢化玻璃不能进行切割,钻孔或硬物敲击。搬移或安装过

程中,小心确保玻璃边、角部位不受撞击,以防爆裂伤人。

建议:

将本产品安装在科勒淋浴盆或挡水条上(需另行购买)。

如自备挡水条,建议顶面宽度尺寸大于

 80mm

重要事项:

淋浴房需要安装在平坦垂直的墙面上。墙面的垂直度推

荐在正负

 3mm/m 

以内。如果超出此范围,科勒公司将不保证淋浴

房的完美使用。

CAUTION: Risk of injury or product damage. 

Tempered glass cannot be cut, drilled or knocked by 

hard object. Make sure corner area of the glass 

refraining from knocking so as to cause personal injury 

due to broken glass.

ATTENTION:

 Please install this door on Kohler receptors or 

curbs(Not included). If the curb is not Kohler-branded, please 

note its top width should be more than 80mm.

IMPORTANT: 

The shower door requires a flat vertical 

finished wall. The squareness of the wall is recommended no 

more than 3 mm/m. KOHLER Company won't take 

responsibility of the installation quality.

24hrs

ROUGHING-IN

尺寸图

Unit: mm

单位:毫米

Do not use the enclosure for at least 24 hours.

安装后

 24 

小时内请勿使用淋浴房。

FAMILY CARE

亲悦

INSTALLATION INSTRUCTIONS

安装说明书

HALF DOOR, 10mm

半扇门, 

10mm

防爆贴膜玻璃

K-706264T-FM-SHP

SKU

B

H

706264T-FM-SHP 550-900(mm) 612(mm)

© Copyright Kohler China Investment Co., Ltd. 2019

© 

版权为科勒(中国)投资有限公司所有

 2019

1386867-T01-A

H

B

Summary of Contents for FAMILY CARE K-706264T-FM-SHP

Page 1: ...r installation lay out and identify all the parts Use the exploded view illustrated on page 2 for reference For the installation method of customized shower with different dimensions please refer to this instructions The product complies with QB 2584 2007 警告 可能有人员伤害或者产品损坏的危险 钢化玻璃不能进行切割 钻孔或硬物敲击 搬移或安装过 程中 小心确保玻璃边 角部位不受撞击 以防爆裂伤人 建议 将本产品安装在科勒淋浴盆或挡水条上 需另行购买 如自备挡水条 建议顶面宽度尺寸大于 80mm 重要事项 淋浴房需要安装在平坦垂直的墙面上 ...

Page 2: ... Gun 硅胶枪 Safety Goggles 护目镜 2 X2 X2 X4 X1 X1 X6 1386867 T01 A 1313024 Lock Seat With Water Diveter 靠墙门栓座 1313012 Lock Seat With Water Diveter 靠挡水条固定座 1102106 Fixed Screw 十字不锈钢平头自攻丝 螺钉 ST3 7 40 Half Door Components 门玻组件 Protected Strip 保护胶条 Lock Seat With Water Diveter 靠墙门栓座 Lock Seat With Water Diveter 靠挡水条固定座 Fixed Screw 十字平头自攻丝螺钉 ST3 7 40 Hollow Wall Anchor Nylon 膨胀套 Pan Screw ST3 5 40 圆头螺丝 ST3 ...

Page 3: ...挡水条 没有挡水条的紧靠墙材 背面 靠墙壁 2 用水平仪测量 使半门铰链端面与地面垂直 3 参考下面方式 用铅笔标记螺钉孔位置 然后钻孔将膨胀套装入墙壁 4 将半门与墙壁固定 The surface indicated by the arrow presses tightly against the curb 箭头所指平面紧靠挡水条 1 Cover the lock seat with water diveter on the bolt and press it tightly against the wall Mark the position with a pencil 2 Drill a hole and install the hollow wall anchor by reference to step 1 3 Install the lock seat with water d...

Reviews: