background image

BEFORE YOU BEGIN

1256389-AN2-A       Jan 2015

INSTALLATION 
INSTRUCTIONS

TAPWARE

Englefield

SORRENTO

Basin Mixer

97541A-CP

If you are building a 

bathroom from scratch, 

giving your bathroom a 

makeover or just replacing 

an old tap, Englefield can 

provide a solution for you.

All information is based on the latest product information available at the time of

publication. ENGLEFIELD reserves the right to make changes in product

characteristics, packaging, or availability at any time without notice.

Please leave this installation guide for the consumer as it contains

important information.

NOTES:

1. Flush the water supply pipes thoroughly to remove any debris.

2. An in-line water filter must be used with this product.

3. If possible, install this mixer before installing basin.

4. Ensure all local plumbing codes are observed.

5. Recommended working pressure: 100kPa to 500kPa.

6. Maximum working pressure: 800kPa.

7. If pressure exceeds 500kPa, a pressure limiting valve must be installed.

8. All installations should comply with the relevant requirements of AS/NZS 3500

    and AS/NZS 6400.

 

ROUGH-IN

CONTACT AND WARRANTY INFORMATION

NEW ZEALAND 

KOHLER NZ LTD

Free Ph:  0800 100 382
Free Fax: 0800 664 488

www.englefield.co.nz

AUSTRALIA 

KOHLER CO.

Free Ph: 1 800 ENGLEFIELD
              (1 800 364 533)

www.englefield.com

For warranty information, please visit our website

Page 4

1256389-AN2-A       Jan 2015

Englefield

INSTALLATION INSTRUCTIONS

SORRENTO  

Basin Mixer

35

CLEANING INSTRUCTIONS

All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with a 

clean soft cloth. Many cleaners may contain such chemicals as ammonia, chlorine, toilet chemicals etc. which

could adversely affect the finish and are not recommended for cleaning.

Do not use abrasive cleaners or solvents on Englefield tapware.

Reviews: