21. Install the Bumpers
NOTE:
To ease bumper installation, the header connectors may need to be loosened and temporarily
moved away from the bracket.
Press the side tab of the bumper into the end of one of the headers behind the header connector. If
the tab does not fit, use a 1/8
″
hex wrench to loosen the header connector.
Rotate the bumper against the bracket, and press the opposite tab into the opposite header.
Repeat for the second bumper on the opposite side.
Make sure the header connectors are tight against the bumpers. Tighten the setscrew to secure in
place.
1/8"
Header
Connector
Bracket
Side
Tab
1380408-2-B
24
Kohler Co.
