1019440-9-
A
SERVICE KIT INSTRUCTIONS
Proximity Sensor
Service Kit
1019439
Introduction
-
Please read all instructions carefully to familiarize yourself with the
required tools, materials and installation procedures.
-
This document contains the latest product information available at the
time of publication. Kohler reserves the right to make changes in
product characteristics, packaging or availability at any time without
notice.
Recommended Tools and Materials
Pliers
Sealant
Installation
Neck Jet Reed Switch
(Proximity) Wires
Neck Jet Manifold
P5 Wiring Harness
(REED SWITCH) Lead
-
Locate the neck jet reed switch (proximity) sensor wires where they
connect to the main P5 wiring harness in the whirlpool. The label on
the harness lead reads “REED SWITCH.” Disconnect the neck jet reed
switch wires from the main harness.
-
Cut the reed switch wires at the neck jet manifold, leaving 6” (15.2cm)
of wire with the connector. Save the connector and wire assembly.
Summary of Contents for 1019439
Page 10: ...1019440 9 A 10 Kohler Co ...
Page 11: ...1019440 9 A 11 Kohler Co ...
