Rotisserie shaft & skewer racks
1.
Place the two skewer racks at each end of the rotisserie shaft. Make sure the set
screws are on the outer side of the rotisserie shaft.
2.
Slightly tighten the set screws. Do not overtighten as you may need to adjust the
tightness after you insert the skewers.
3.
Carefully poke the skewers through the food.
Rotisserie spit assembly
1.
Insert each skewer point through the holes on the left skewer rack (Fig. C).
2.
Squeeze the clip-end of each skewer as you insert them into the opposite skewer
rack slot to secure.
3.
Release the clip to securely rest the skewer in the slot as shown (Fig. D).
4.
Repeat process 3 through 6 in a uniform manner around the skewer rack. Make
sure the skewers are evenly spaced.
5.
Tighten the set screws to make sure they are securely in place.
6.
Use caution while inserting the spit into the unit to prevent getting poked by the
skewer ends.
FINAL ASSEMBLY
FRONTAL VIEW
Left side
Set screw
Skewer
racks
Right side
Rotisserie shaft
Set screw
Fig. C-Left Side
Fig. D - right side
Final Assembly
