36-Chime Wireless Digital Doorbell
KAWLSDBELL
User Manual
Product features
•
Easy to install – no complicated wiring required.
•
Low power consumption.
•
Light-up feature for the elderly or hard of hearing.
•
36 different tunes.
Installation
Method one: Double-sided tape
1. Locate the position you wish to mount the transmitter. Clean the area well
and allow to dry.
2. The back cover of the transmitter can be pried off using a small flat-head
screwdriver. Then peel off one of the protective coating sides of the
double-sided tape and apply it to the back of the transmitter.
3. Peel off the second protective coating to the double-sided tape and press
the unit against the surface until it is firmly attached.
4. Whenever you are opening the receiver, pay attention to not touch the
electronic components, and ensure that you pay attention to the battery
polarity so it is not inserted incorrectly.
Method two: Screw fixture (screws not included)
1. Locate the position you wish to mount the transmitter. Clean the area well
and allow it to dry. Please be aware of any electrical wiring or other
obstacles that may be inside the wall behind the location point.
2. The back cover of the transmitter can be pried off using a small flat-head
screwdriver.
3. Hold the back cover at the point you wish to mount the transmitter, then
using a screwdriver, drill screws through the holes in the cover, after which
the back should be firmly affixed to the wall.
4. Whenever you are opening the receiver, pay attention to not touch the
electronic components, and ensure that you pay attention to the battery
polarity so it is not inserted incorrectly.
Changing the musical tone
There is a button on the side of the receiver unit that can be used to cycle
through the doorbell's 36 different tunes.
