Koehler K93500, Operation And Instruction Manual, Page: 13 / 57

Pin On Disc Friction & Wear Test Rig
Page 13
POWER INPUT CABLE (Fig.No.08)
It is a 3-core cable with 4 pin harting connector end to supply 110V input supply to machine.
CONTROL CABLE (Fig.No.09)
It is a 19 pin MS connector cable which carries power from the controller to machine panel.
SIGNAL CABLE (Fig.No.10)
This connects machine front panel to controller back panel, it sends the signals of frictional
force and LVDT sensor to controller. It is 15 pin D type connector.