K13992 Cleveland Open Cup Flash Point Tester
Operation and Instruction Manual
K13992-Manual
-
8-
3 Getting Started
The instructions for preparing the equipment
assume that the user is aware of the contents of
this document, which lists the warranty conditions
and important precautions.
3.1 Packing List
K13992 Cleveland Open Cup Flash Point
Tester, 220-240V 50/60Hz
Cleveland Open Flash Cup
Precision machined brass Cup with heat
resistant handle
K13992-Manual K13992 Cleveland Open Cup
Flash Point Tester Operation and Instruction
Manual
3.2 Additional Accessories Required for
Testing
ASTM 11F Thermometer
Range: 20 to 760°F
ASTM 11C Thermometer
Range: -6 to +400°C
3.3 Unpacking
1.
Check Shock Watch Label on Cardboard Box
for indication of rough handling and possible
damage.
2.
Check labeling for correct orientation of
instrument. (e.g. This Side Up)
3.
Carefully open top of box with box cutter and
remove packing foam insert.
4.
Extract instrument and place on suitable cart
for transportation to work area / lab bench.
WARNING:
Be sure two or more individuals
are available for extracting and lifting instrument
from box to cart and from cart to bench.
Individuals must lift in accordance to proper
technique. See Figure below.
5.
Lift instrument from cart and place on bench.
6.
Carefully unpack and place the instrument and
accessories in a secure location. Ensure that
all parts listed on the packing list are present.
Inspect the unit and all accessories for
damage. If any damage is found, keep all
packing materials and immediately report the
damage to the carrier. We will assist you with
your claim, if requested. When submitting a
claim for shipping damage, request that the
carrier inspect the shipping container and
equipment. Do not return goods to Koehler
without written authorization.
