Koden MDS-1100R Series, Installation Manual

Page: 13 / 70

MDS-1100R Series Chapter 1 Prior to installation
0092642260-01 1-1
Chapter 1 Prior to installation
1.1 Installation precautions
In order to obtain the maximum performance of radar systems, this radar system should be installed by
qualified engineers in charge of installation and maintenance. Installation procedures include the
following:
(1)
Unpacking of components;
(2)
Inspection of composition units, spare parts, accessories and installation materials;
(3)
Checking of supply voltage and current capacity;
(4)
Selection of the location for installation;
(5)
Installation of the Antenna-Scanner unit;
(6)
Attachment of accessories;
(7)
Planning and implementation of cable laying and connection;
(8)
Coordination after installation.
1.2 Unpacking of components
Unpack components and check that all items correspond with the description of the packing list. When
a discrepancy or damage has been found, please contact the transportation/insurance firm, and follow
procedures for searching for loss items and claim of expense.
1.3 Appearance verification of each unit and accessories
Please check the appearance of each unit carefully, confirm that they are dent and crack free.
Moreover, please also check the interior of each unit and confirm that there is no electric or
mechanical damage.
1.4 Selection of location for installation
In order to obtain the maximum performance of the units, it is necessary to install them in consideration
of matters as described below.