Koden MDC-7006, Installation Manual

Page: 69 / 160

MDC-7000/7900 Series Chapter 4 Setup after installation
0092669002-07 4-9
4.1.10 TIMES ENABLE
In following operation user can enable trail times, past position, vector time, etc that are not available by
default.
By this setting, you can choose useful these functions time easily.
Initial value: 5sec, 30sec, 1min, 3min, 6min, 12min, 30min, 60min
(1) Press MENU
key to display “Menu”.
Select [MAINTENANCE] => [STARTUP] => [TIMES ENABLE]
(2) Select trail times value and set [ON] or [OFF].
(3) Press ENT key to save the times enable or disable to use.
Fig.4.5. Times enable setting
>MAINTENANCE
>STARTUP
>TIMES ENABLE
5sec
ON
10sec OFF
15sec OFF
30sec ON
1min ON
2min OFF
3min ON
5min OFF
6min ON
10min OFF
12min ON
15min OFF
24min OFF
30min ON
45min OFF
48min OFF
60min ON
2hr OFF
4hr OFF
8hr OFF
16hr OFF
24hr OFF