Koden MDC-5004, Installation Manual, Page: 17 / 156

MDC-5000 Series Chapter 2 System configurations
0092653004-00 2-3
2.4 Option list
No. Name Specification Comment Weight
/Dimension
/Quantity
1 Gyro converter S2N, U/N 9028C qwerty-electronic
2 Log pulse NMEA
converter
L1N, U/N 9181A
qwerty-electronic
200pulse/NM only
3 Gyro / Log interface
ADPC-101
1.5 kg
4 Rectifier unit PS-010 5A fuse attached 3.5 kg
VL-PSG001 For RW701B-09
5 AC power cable VV-2D8-3M Without connectors on the both
sides
3 m
6 Connecting cable CW-373-*
*: 5M, 10M or 30M
With 6-pin water resistant
connectors at both ends (cable
for data)
5 m, 10 m
or 30 m
CW-374-5M With a 6-pin connector (1006
series) and a 6-pin water
resistant connector (cable for
data)
5 m
CW-376-5M With a 6-pin water resistant
connector and one end plain
(cable for data)
5 m
CW-387-5M With a 8-pin water resistant
connector and one end plain
(cable for AIS)
5 m
CW-561- *
*: 10M or 30M
With 12-pin water resistant
connectors at both ends (cable
for remote display)
10 m or 30 m
CW-576-0.5M With a 10-pin water resistant
connector and D-Sub connector
(analog RGB) + Alarm out
0.5 m
CW-401- *
*: 5M or 10M
Operation unit cable 5 m or 10 m
7 Antenna-Scanner unit
and Processor unit
connecting cable
CW-845-*
*: 20M, 30M, 40M,
50M, 65M, 100M
With connectors on the both
sides
(For MDC-5006/5012/5025)
20m, 30m,
40m, 50m,
65m or 100m
242J159098*-**M
**: 20M, 30M, **M
(100m max)
With connectors on the both
sides
(For MDC-5004)
20m, 30m,
**m (100m
MAX)