Koden KSD-1100, Operation Manual, Page: 31 / 98

KSD-1100/1210 Chapter 2 Operation and Setting
0093107081-00 2-3
parameter setting.
[F] NAVI Data
Click to enter the navigation data page.
You can select waypoint and route data to quickly call navigation, edit, and add navigation data.
[G] Plot Data
Click to enter the Plot data page including the drawing Points, Lines, and Polygon. You can select to
view, edit, and create new Plot data.
[H] Track
Click to enter the track page. You can select record, view, edit, and add a new track.
[I] Dashboard
Click to enter the digital dashboard page to support the customized display of COG, HDT, SOG, BRG,
Lat/Lon, DPT, Wind, TEMP, XTE and other data.
[J] Sailing Data
Click to enter the Sailing Data management page to support the customized display of ship SOG, COG,
HDOP, VDOP, HDT, DPT, Wind, TEMP, XTE, RNG, BRG, ETA and other data.
[K] Video Surveillance
Click to enter the video monitoring APP to view the real-time video picture of the currently connected
camera, and to support automatic video recording.
[L] GNSS
Click to enter the GNSS ephemeris. You can select GNSS source and location mode to view the
ephemeris.
[M] Calendar
Click to enter the Calendar APP to view the current time.
[N] Tide
Click to enter the tide page to view the tide time and tide height information of the site.
[O] Switching Record
Click to enter the Switching Record. You can view the device boot time, last working time, off time, and
working hours.
2.1.3 App fixed column introduction
[15] MOB
Display the records of mark points / view mob mark records / quickly call navigation.
[16] Message
View the received and sent short messages / add contacts and common words.
[17] Display mode
Chart display mode, sound and screen brightness can be set.
[18] Alarm
Click to enter the alarm setting page, the following item can be set. Alarm setting of the ship / AIS alarm
setting and alarm log / Main alarm switch