Koden KGP-922, Operation Manual, Page: 98 / 136

Chapter 6 Data backup and Initialization KGP-922
6-2 0093130022-00
In the case
“Read out of setting values”
(1)
Press [ ] or [ ] key to move cursor onto the “Read out of setting values”.
(2) Press key.
(3) Select
“Yes” in the pop-up and press key.
(4) If a message called
“Read out complete” appears, it is the end.
*The name of data file is
“KM-F81_SETUP.dat”.
6.1.4 Writing of data
In the case
“Writing of Waypoint / Route data”
*The data file is necessary in USB memory named
“KM-F81_WPT_RTE.dat”.
(1)
Press [ ] or [ ] key to move cursor onto the “Writing of Waypoint / Route data”.
(2) Press key.
(3) Select
“Yes” in the pop-up and press key.
(4) If a message called
“Writing complete” appears, it is the end.
ENT
ENT
ENT
ENT
CAUTION
Data is overwritten
Press
ENT
Press
ENT
Press
ENT