Koden KGP-922, Operation Manual

Page: 86 / 136

Chapter 4 Setup Procedure KGP-922
4-30 0093130022-00
4.7.4 Setting the output Talker ID
You can change the Talker ID
“GP” only or System dependent (“GP”, “GL” and “GN”)
(1) Press key until Menu options 1 to 10 appears.
(2) Press key to select
“
9: Interface
”.
(3) Press key to select
“
4: Main Talker ID
”.
(4) Press [ ] or [ ] key to move cursor onto the Main Talker ID
“GP”, “System dependent”.
(5) Press key.
Initial setup: System dependent
4.7.5 Setting the output ALF or ALR
You can output alert related sentences to external devices.
(1) Press key until Menu options 1 to 10 appears.
(2) Press key to select
“
9: Interface
”.
(3) Press key to select
“
5: ALF/ALR
”.
(4) Press [ ] or [ ] key to move cursor onto
“
OFF
”, “
ALF
” or “
ALR
”.
(5) Press key.
Initial setup: OFF
4.7.6 Selecting an output sentence
To determine the sentence to be output from the NMEA0183 or CIF:
Output interval can sets 01 to 99 seconds. Sentence does not output when output interval sets 00
second.
(1) Press key until Menu options 1 to 10 appears.
(2) Press key to select
“
9: Interface
”.
(3) Press key to select
“
6: Sentence edit
”.
ENT
9
4/W
MENU
9
MENU
9
5
MENU
6/E
Press
4/W
ENT
Press
5
NOTE: The alert communication with ALR/ACK is not conform to the Bridge Alert Management (BAM)