Koden KGP-922, Operation Manual

Page: 85 / 136

KGP-922 Chapter 4 Setup Procedure
0093130022-00 4-29
You can select from three formats.
1) IEC61162-1
2) NMEA0183 Ver3.0
3) NMEA0183 Ver2.0
In the case
“DATA2” of “1: Connector”
(4) Press [ ] or [ ] key to move cursor onto the output data format to select
“DATA2”.
(5) Press key.
Initial setup: IEC61162-1
You can select from five formats.
1) IEC61162-1
2) NMEA0183 Ver3.0
3) NMEA0183 Ver2.0
4) KBG (When you connected KBG, select this)
5) RTCM (When you connected external beacon receiver, select this.)
4.7.3 Setting the Baud rate
You can change the Baud rate of DATA1 and DATA2.
(1) Press key until Menu options 1 to 10 appears.
(2) Press key to select
“
9: Interface
”.
(3) Press key to select
“
3: Baud rate
”.
(4) Press [ ] or [ ] key to move cursor onto the baud rate
“4800”, “9600”, “19200” or “38400”.
(5) Press key.
Initial setup: 4800
ENT
ENT
9
3
MENU
Press
2/N
Press
3