Koden KGP-922, Operation Manual, Page: 54 / 136

Chapter 3 Alarms KGP-922
3-4 0093130022-00
3.3 Alerts
Alerts are different from alarms. There is no setting on / off by the operator. It occurs when you should
pay attention to or warn about system and operating conditions.
There are three types of Alerts: Alarm, Warning, and Caution.
Alarm : Condition requiring immediate attention and action to maintain safe navigation
Note: GNSS products do not initiate alarms
Warning : In situations where it is necessary to immediately check the status and take preventive
measures.
Caution : There is no urgency but need to pay attention.
3.3.1 Acknowledge of alerts
When an alert occurs, the buzzer sounds (except Caution) and the contents of the alert is
displayed at the bottom of the screen. When you acknowledge an alert and press the CLR key, the
buzzer is silence and the alert disappears. When multiple alerts are occurring, pressing the [
▲
] key
will display the next aler
t. If the condition recovers before acknowledge, the buzzer will be silence,
but the alert display remains as Rectified.
*When multiple alerts are occurring, pressing the [
▲
]key will display the next aler t.
*Alert icon Alert message *Number of alert:
*Type of Alert icon
: Active
–unacknowledged Alarm
(Note: Not used in GNSS products)
: Rectified
–unacknowledged Alarm
(Note: Not used in GNSS products)
: Active
–unacknowledged Warning
: Active
–acknowledged Warning
: Rectified
–unacknowledged Warning
: Caution
Alert ID