Koden KGP-922, Operation Manual

Page: 102 / 136

Chapter 6 Data backup and Initialization KGP-922
6-6 0093130022-00
6.2.5 Selecting an initial value (North, South, East, West) of latitude/longitude.
N/W (N. Lat./W. Long.): When editing a waypoint, GPS position is started using the north latitude/west
longitude region as the initial value.
N/E (N. Lat./E. Long.): When editing a waypoint, GPS position measurement is started using the north
latitude/east longitude region as the initial value.
S/W (S. Lat./W. Long.): When editing a waypoint, GPS position measurement is started using the south
latitude/west longitude region as the initial value.
S/E (S. Lat./E. Long.): When editing a waypoint, GPS position measurement is started using the south
latitude/east longitude region as the initial value.
Initial setup: N/W
6.2.6 Frequency adjustment of the buzzer
You can change the frequency of the buzzer. You can select the five frequencies.
“
0
” is the lowest
sound.
“
4
” is the highest sound.
Initial setup: 1
6.2.7 Frequency adjustment of the alert sound
You can change the frequency of the alert sound.
Enter a frequency (2.20 to 3.20) by numeric keys.
Initial setup: 2.85 kHz
Press
ENT
Press
ENT