Koden KGP-922, Operation Manual, Page: 88 / 136

Chapter 4 Setup Procedure KGP-922
4-32 0093130022-00
4.7.8 Setting the IP Address
Set the IP Address and Subnet mask, Default gateway.
(1) Press key until Menu options 1 to 10 appears.
(2) Press key to select
“
9: Interface
”.
(3) Press key to select
“
7: Ethernet
”.
(4) Enter the IP address for your equipment, subnet mask and default gateway with the numeric keys.
4.7.9 Setting the DHCP
There are two ways to set the IP address, either by automatic acquisition from the DHCP server on the
network or by manually setting the address.
To obtain it automatically, do the following operation.
(1) Press key until Menu options 1 to 10 appears.
(2) Press key to select
“
9: Interface
”.
(3) Press key to select
“
7: Ethernet
”.
(4) Press [ ] or [ ] key to selec
“
4: DHCP
”.
(5) Press key.
(6) Press [ ] or [ ] key to move cursor onto
“
OFF
” or “
ON
”.
9
MENU
7
Press
7
NOTE: Be sure the IP address is not the same as other equipment on the network.
9
7
MENU
ENT
Select
4: DHCP