Koden CVS-FX2, Installation Manual, Page: 64 / 78

Chapter 2 Adjustment CVS-FX2/FX2BB
2-2
0092602002-12
The setup box of [LF TD Type] will be
displayed.
4. When a Broadband transducer is used,
press [▲] and [▼] to select [Broadband
Type]. When a transducer other than that
is used, select [Others]. When a low
frequency transducer is not used, select
[OFF].
5. Press [ ].
When [Broadband Type] is selected, the
setup box of Broadband Type will be
displayed.
When [Others] is selected, the setup box
of others will be displayed.
6. Press [▲] or [▼] to select a transducer to
use.
The TD selected as a [Broadband Type] is
reflected to the [Broadband Type] of high
frequency side.
7. Press to close the menu.
2.2 Setup of frequency of
transducer
The high or low frequency can be setup for
transducer frequency.
2.2.1 Setup of frequency for high
frequency transducer
TD Setting
– HF TD1 Setting
1. Press .
2. Select [TD Setting]
– [HF TD1 Setting].
3. Press [ ] of .
The setup box of [HF TD1 Setting] will be
displayed.
4. Press [▲] or [▼] to select [Frequency].
5. Press [ ].
The setup box of [Frequency] will be
displayed.
6. Press [▲] or [▼] to select [Frequency].
7. Press to close the menu.
TD Setting
– HF TD2 Setting
1. Press .
2. Select [TD Setting]
– [HF TD2 Setting].
3. Press [ ] of .
The setup box of HF TD2 Setting will be
displayed.
4. Set as the same way as HF TD1 Setting.
5. Press to close the menu.
2.2.2 Setup of frequency for low
frequency transducer
TD Setting
– LF TD1 Setting
1. Press .
2. Select [TD Setting]
– [LF TD1 Setting].
3. Press [ ] of .
The setup box of [LF TD1 Setting] will be
displayed.
4. Set as the same way as [HF TD1 Setting].
5. Press to close the menu.
TD Setting
– LF TD2 Setting
1. Press .
2. Select [TD Setting]
– [LF TD2 Setting].