Koden CVS-872D, Installation Manual

Page: 108 / 112

Chapter 3 Maintenance CVS-872D
3-4 0092607062-01
When the voltage falls in abnormal range,
the indication will be in red.
(7) [VOLT2] displays voltage of power input
line. When this voltage falls in abnormal
range, alarm will sound and an alarm
message will be displayed.
When the voltage falls in abnormal
range, the indication will be in red.
(8) [TEMP] displays water temperature of
the water temperature sensor.
In the case of non connection, - 30.0 in
red will be displayed.
(9) [SPEED] is always displayed as 0.0kn.
(10) [Version] displays the version No. of
the system software.
(11) [IPL] displays the version No. of IPL
version.
(12) [Top.ncd] will display the version No.
of FPGA data.
3.4.2.2 LCD Test
When [LCD Test] is selected, grid will be
displayed. Each time [ ] key is pressed, the
color of display will change, and the setup
box of [System Check] will be finally
displayed.
3.4.2.3 XID
All data received from the XID adaptive TD
is displayed.
Select [XID] in the [System Check] settings
box.
Press [ ] key to display the 1 / 3rd page of
the XID data.
You can see the TD model name, serial
number, etc.
Press the [
▼
] key to display 2/3 page and
then 3/3 page.
Press to close the menu.
3.4.3 Initialize
This is to return all setup of each CM or the
whole system to the factory default settings.
However, waypoint data and image stored
data will remain as they are.
1. Press .
2. Select [Maintain]
– [Initialize]
3. Press [ ] of .
The setup box of [Initialize] will be
displayed.
4. When a specified CM is to be initialized,
select [CM1] to [CM6] with [▲] and [▼]
keys. To initialize the whole system, select
[System ALL].