the Voice Sequencer. Each allocated voice (the sequencer may trigger many of them) is
represented by a white square if it's currently ON, or gray square if it's in release state.
Main Audio Output
: Selects the audio output used for Patch and Voice modes.
Digital Gain
: Sets the global output volume. It’s useful for minimizing noise if you play
quiet sounds (high digital gain), or to avoid clipping if you play lots of stacked sounds
(low digital gain).
System
The current firmware version is shown on this
page.
The Update button allows to upgrade the
firmware via a USB drive.
The system monitor is mostly useful to us for
debug purposes, if you encounter technical
issues.
Reset
Resets the system to its original state. You can
do a full reset or partial one. Reseted items
can’t be restored, use this feature with care!
TouchPiano
Provides a small touchscreen-based keyboard,
for fun or as a last resort if your controller/input
fails. The current selected sound from the
current mode is used. To change it, go into a
mode (Performance, Patch or Voice), select a
Part/Patch/Voice then go back to the TouchPiano.
Velocity:
When checked, different velocities can be triggered depending on where you
press the button (top = loud, bottom = quiet).
Pitch Bend:
Same as a pitch bend wheel but with the touch screen.
33
Summary of Contents for EssenceFM
Page 1: ...English Other languages and PDFs available at kodamo org...
Page 2: ......
Page 40: ...Memo 39...
Page 41: ......
