Kodamo EssenceFM, User Manual

Page: 20 / 41

MOD TAB:
Velocity Sensitivity (-127 ~ +127): Sets how the
operator volume is affected by note velocity. A value
of zero means the operator's volume is always as
defined by the Volume parameter in BASE tab. As
you increase its value, low velocities can scale its
volume down more and more.
LFO AM: Sets how much the LFO affects the current
operator’s volume.
LFO FM : Sets how much the LFO affects the current operator’s frequency.
Key Vol Scale : This curve allows you to set the operator key scaling. It scales the
operator’s volume according to the MIDI note number. There are 3 parameters: Lower
volume, Center note, and Upper volume. The two (upper and lower) volumes represents
the amount at bottom and top of your MIDI keyboard. The center note parameter sets
the root of those two curves.
PITCH EG TAB:
This envelope allows you to control the selected
operator pitch over time. See Envelope Edit section
to know more about manipulating envelopes.
Pitch EG Range (shown when no point is selected):
This value sets the Pitch EG maximum value.
Available ranges are Tone, Quint and 1 to 4 octaves.
Other parameters : See next section (Envelope
Editor)
Envelope Editor
The envelope editor is quite different from those you
can find in other synthesizers. Instead of the classic
ADSR it's made of points that can be placed freely to
create any curve. Each envelope segment is delimited
by 2 points, you can drag them to adjust their
horizontal and vertical position. There are other ways
19