Kodamo EssenceFM, User Manual

Page: 16 / 41

Editing voice/operator parameters
When an operator is pressed, the right panel shows
the operator's parameters.
When you press the touchscreen in an empty region
of the left part of the screen, the right panel shows
the voice settings.
Voice settings
BASE TAB:
Voice Name
: Sets the name of the voice.
Volume (0 ~ 127): Sets the volume of the voice.
Transpose (-36 ~ +36): Sets the semitone transposition of the voice.
Tuning (-100 ~ +100): Sets the fine tuning of the voice.
Scale : Selects the scale which will be applied to the voice (cf. Tuning section in Global
Mode).
Category : Assigns a category to the voice (cf. Sorting section in Global Mode).
Algorithm Library : Selects from one of our 32 preset algorithms to help you to start
creating a new voice.
Randomize : This button generates a new sound using a “smart randomized” process, in
case you need some new sound ideas!
LFO TAB:
Waveform (0 ~ 23): Selects the waveform you want
to use with your LFO. It’s the same waveform set
used into synthesis.
Mask (0 ~ 12): This mask distorts and reshape the
selected LFO waveform. It doesn’t overwrite the
original waveform.
Speed (0 ~ 127): Sets the LFO speed.
Delay (0 ~ 127): Sets the delay between the Note On
event and the LFO start.
Attack (0 ~ 127): Sets the attack rate for the LFO.
Phase Offset (0 ~ 31) [only shown when Random and Common are unchecked] : Sets the
waveform phase offset where the LFO starts at.
15