Kodak X-OMAT 7000, User Manual, Page: 7 / 146

Introduction
7E6174 – 16FEB01 1– 1
1
Introduction
Overview
The KODAK X-OMAT Multiloader 7000 (Multiloader) is a compact microprocessor-
controlled room light film handling and film processing system. The Multiloader holds
up to 7 film supply magazines and is compatible with all sizes of KODAK X-OMATIC
and KODAK X-OMAT Cassettes, KODAK MIN-R 2 Cassettes and the KODAK
X-OMATIC Video Film Holder.
When the cassette is inserted into your Multiloader, the exposed film is removed, the
cassette is reloaded with unexposed film and returned to the operator in less than 20
seconds.
Exposed film is fed into the KODAK X-OMAT 3000 RA Integrated Processor
(Processor), in the Multiloader, which is capable of operating at 3 different user
selectable cycles for either K/RA, Rapid, or Standard cycle processing of film.
In the K/RA cycle, the Multiloader is compatible with KODAK RA films and KODAK
RA/30 chemistry.
Cassette insertion and exit, access to the Film Supply Magazines and film exit are
performed at the Operator Interface located at the front of the Multiloader. The
Magazine Door, Top Cover and the Processor Front Panel on the front of the
Multiloader allow you to access the Multiloader and the Processor.
H186_1000AC
H186_1000ACI
Front Panel
Processor
Captive Screw
Latch
Film Exit
Latch
and exit
insertion
Cassette
Captive Screw
Door
Magazine
Top Cover