13
Installing a Memory Card:
Open the battery cover door, then insert the memory card into the card slot as shown in the illustration below (note the direction of the memory card opening).
Push the bottom end of the memory card with your
f
ingertip into the slot completely and close the battery cover door.
A memory card (microSD / microSDHC / microSDXC) is essential to recording and saving 360
0
photos and videos and is not included in the product
packaging. The memory card needs to be purchased separately. Please use a memory card which is Class 10 or higher and has a capacity of 8GB to 256GB.
When recording with any new memory card Class 10 or higher, it is recommended you format the memory card before using.
To remove the memory card, open the battery cover door, gently press the memory card to eject it and remove it carefully.
The camera will automatically turn o
ff
if the memory card is inserted or removed when the product is turned on.
Mounting / Removing Battery Cover Door:
Removing Battery Cover Door:
Pull the battery cover door hinge out carefully (as shown in the
diagram below) until the battery cover door is separated from the
camera body.
Mounting Battery Cover Door:
Snap the battery cover door back on to the camera body at the hinge section
as shown in the diagram below.
With the battery cover removed, user may readily access the USB/HDMI/AV interfaces at their discretion.
File size may increase or decrease depending on the subject, shooting conditions, etc. Disc capacity varies with manufacturer and formatting method. The
exposure time may be used for reference.
The camera is not waterproof or weatherproof if the battery cover door is removed.
