A-61789/ISIS January 2016
27
Timeout
— allows you to select the amount of time, in seconds, the
scanner will wait once the last document enters the feeder before the
timeout occurs. This option can also be turned off.
Response
— indicates the action that will be
taken when the document
feeder timeout has been reached.
•
Stop Scanning:
scanning will stop and control will return to the
scanning application (i.e., ends the job).
•
Pause Scanning
: scanning will stop but the scanning application will
be waiting for additional images (i.e., stops the feeder). Scanning
may be resumed by pressing the
Start/Resume
button on the
scanner. Scanning may be stopped by pressing the
Stop/Pause
button on the scanner or via the scanning application.
Document Handling
—
allows you to select how the scanner
transports documents through the scanner. This affects how the
documents are fed into the scanner, how fast they move through the
scanner, and how they are placed in the output tray
.
•
Normal
•
Special
: for irregularly shaped documents (e.g., pages with coupons
removed or documents with large holes or cutouts in them).
Document Protection
— allows you to select how aggressively the
scanner detects documents that enter the scanner incorrectly. This can
occur when documents are not prepared properly for scanning
(e.g., stapled or paper clipped documents).
•
None
•
Minimum
: select this option if the scanner is stopping too frequently
on documents that you do not want it to detect.
NOTE: Documents may become more damaged before detection
occurs.
•
Normal
: this is the recommended option as it provides a balance
between minimizing document damage and stopping the scanner
unnecessarily.
•
Maximum
: select this option to get the least amount of document
damage.
NOTE: This may cause the scanner to stop unnecessarily.
