Quick Reference -- The ultimate reference for Kodak
EKTALITE
Slide Projectors
25
by
Kodak
AG
Stuttgart
CMS
edition
5/2001
-QR-Elite.pm6.5
External Control
Hardware Controllers
n
Hardware Controllers
EKTALITE
2000
Dissolve units (e.g. as former Kodak
PDC, Stumpfl, Bässgen, ARION etc)
for 12 Pin Standard.
(Addresses pages 31-34)
12 Pin Adaptor (Extension
Connector) CAT No 861 9629.
Note
Only necessary for all dissolvers with
external TRIAC adaptor! It is not
allowed to plug such an adaptor unit
directly on top of the projector`s 12 pin
socket, as this could lead to a heat
build-up.
1
.
If the Kodak Ektalite
IR Remote Control is
connected to a dissolve
unit the receiver needs a
battery!
2
.
Insert battery and switch to
BATT position