Kodak DryView 8150, User Manual

Page: 160 / 178

5-8 7F3319 October 4, 2004
Optimizing Image Quality
NOTE: Some DICOM GSDF-modalities may direct the use of DICOM
Presentation Look Up Tables (PLUTs) for some or all images. If the
PLUT capability in the 8150 Imager is enabled, a PLUT sent from
the modality overrides the GSDF0 TFT set (used for GSDF
modalities) and associated parameter settings. The DICOM PLUT
capability in the Imager is normally enabled but can be disabled by
your Service Provider.
Table 2. GSDF0 Dmax Setting versus
Table Number (Contrast Setting)
Density (Dmax) Table Number
(Contrast)
1.7 1
1.8 2
1.9 3
2.0 4
2.1 5
2.2
6
2.3 7
2.4
8
2.5 9
2.6
10
2.7 11
2.8 12
2.9 13
3.0
14
3.1 15
Density and Table Number must be chosen in the pairs
shown.