Kodak DirectView CR 500 System, User Manual

Page: 85 / 236

Maintaining Image Quality
August 1, 2003 1F1976 6-5
Use the following table to make your image processing selections.
NOTE: You can reprocess an image before accepting it. If the image is
accepted and delivered, select the image thumbnail to display the
image.
• Select Redeliver Image to redeliver the image without changes.
• Select Create a Copy of this Image to display a copy of the image to
Parameter Procedure
Black Surround Mask, Black
Bone, Edge Enhancement,
EVP, 1 cm Scale, and Grid
Suppression
1.
Select the appropriate check box to
select a function. If you cannot select
it, the option is not available.
2.
Select Reprocess Image.
3.
Evaluate the image. If the parameter
does not improve the image, select
the check box again and then
reprocess.
Left, Right, or Up Arrow
Marker
1.
Select the Left, Right, or Up Arrow
check box.
2.
Select location of the marker in the
image.
The marker appears on the image.
3.
To remove the marker, select the
check box.
NOTE: This function is set by the Key
Operator. (See “CR Display
Configuration” on page 9-33 ).
Print Internal Text Box
Print External Text Box
True-Size Print
Use the mouse to select any corner to
place the text box. The text box can be
orientated either horizontally or
vertically. Select the edge of the corner
you wish the text box to align with. For
more information see
“Text Box
Configuration (Option)” on page 9-43 .
Select the Print External Text Box
check box. For more information see
“Text Box Configuration (Option)” on
page 9-43
Select the True-size Print check box.