Kodak DirectView CR 500 System, User Manual

Page: 43 / 236

Entering Exam Data
August 1, 2003 1F1976 4-7
Entering Exam Information
After entering the patient information, enter the exam information into the
remaining fields on the
Patient Input Screen. There are mandatory and
optional fields. You must complete the mandatory fields to submit the record
to the CR System.
NOTE: If the Patient Last Name or Patient ID number are not entered, the
image is considered incomplete. The image is not delivered across
the network to a mandatory destination defined by the Key Operator
(such as an archive or a printer), but is routed to destinations not
identified as mandatory, such as a workstation.
Using Procedure
Codes and Procedure
Mapping
How you enter exam information depends on the way your system is
configured.
If you are using Procedure Codes and Procedure Mapping, the image icons
associated with a procedure (study) are predefined. The icons appear
automatically once the Patient Input screen is displayed with the correct
patient information.
For each image in a procedure:
1.
Select the first image icon. The image is highlighted green.
2.
Enter with the keyboard or use the bar code reader on the cassette ID.
NOTE: If you are not using Procedure Codes and Procedure Mapping, you
must define the images associated with every procedure. To do this,
click the body part field, select the appropriate body part, then do the
same with projection. Click
Submit and the image icon appears.