Kodak DirectView CR 500 System, User Manual

Page: 134 / 236

9-26 1F1976 August 1, 2003
Key Operator Functions
3.
Select the Procedure Code or Procedure in the list that you want to
edit.
4.
Select Update Procedure.
Using a HIS/RIS System
To configure Procedure Mapping to work with your HIS/RIS System, make
sure that the code you enter for the Procedure matches the code that comes
from the RIS. You can use any number for the Procedure Code; however, it
will only work automatically with the HIS/RIS when the codes match exactly.
For example, if you had a HIS/RIS procedure “2-view Chest” code 102 and
you want to create a procedure on the CR System called 2-view Chest:
1.
At the Key Operator Functions menu, select System Configuration
then select Workflow Optimization.
2.
Select Procedure Mapping .
3.
Create a procedure named 2-view Chest and enter a code of 102.
4.
Select the icons you want to be displayed when a 2-view chest procedure
is ordered, such as an AP and LAT chest.
When the worklist on the CR System is updated and the RIS code 102 is
received, the AP chest and LAT chest image icons are automatically
displayed.
Deleting a Procedure
1.
At the
Key Operator Functions
menu, select
System Configuration
then select
Workflow Optimization.
2.
Select
Procedure Mapping.
3.
Select the procedure that you want to delete and select
Delete
Procedure
.
4.
Select
Yes
on pop-up screen.
Procedure Mapping
Using the Remote Key
Operator
You can use the Remote Key Operator to create or change Procedure
Mapping with these features:
• Add— Enter a new Procedure Code (required) and Procedure Name and
use the drop-down menus to map the associated exams.
• Find— Search for a Procedure Code or Procedure Name.
• Update— Edit the Procedure Code or Procedure Name.
• Copy From— Copy from an existing Procedure Code to a new or existing
Procedure Mapping entry.
• Delete— Delete the procedure mapping for any existing procedure.