Kodak DirectView CR 500 System, User Manual

Page: 133 / 236

Key Operator Functions
August 1, 2003 1F1976 9-25
7.
Repeat steps three through six for each additional image and select Save
Changes.
8.
Select Back to return to this screen. Repeat these steps for each
procedure you want to map.
NOTE: There is a limit of 30 images you can map per procedure. See
“Default Procedure Codes” on page A-1 for a listing of default
procedure codes from Kodak.
Using an Existing
Procedure to Create a
New Procedure
1.
Enter a new Procedure Code.
2.
Enter a new name.
3.
Select the Procedure Code from which you want to create the new
procedure.
4.
Select Copy Exam.
The images from the procedure you selected in the procedure list are
copied to the new procedure.
Mapping more than 34
Procedures
You can add more than 34 procedure codes, but they won’t appear as
buttons. To do this, follow steps 3 - 8 of
“Procedure Mapping on the CR
System” on page 9-24 .
Editing Procedure Codes
and Names
If you need to change the name or Procedure Code, for example, if you want
to change the procedure code to one of the default procedures to a code that
is compatible with your RIS, do the following:
1.
Enter a new code.
2.
Enter a new name.