Kodak D4600, User Manual, Page: 12 / 60

2-4 November 2014
Setting Up the Printer
3. Connect the USB cable (not included) to the USB connector on
the back of the printer and to the USB connector on the computer.
Turning On the Printer
Move the power switch to the On ( | ) position.
On the operator panel, the orange Power light illuminates. If paper
and ribbon are loaded,
Ready 8 x 10 or Ready 8 x 12 appears,
depending on the size of ribbon that is loaded.
To turn off the printer, move the power switch to the Off ( )
position.
Handling and Storing the Paper and Ribbon
For the best quality prints, carefully handle and store the paper
and ribbons.
• To avoid fingerprints, handle the ribbon by the spool ends and
the paper by the edges. Do not touch the ribbon material or
the glossy sides of the paper.
• Store the paper and ribbons away from direct sunlight, at
a temperature of 30°C (86°F) or lower and a relative humidity
of 60% or lower.