7180 Rudder Angle Indicator
Kobelt Manufacturing Co. Ltd.
Rev B
MNL_7180
18 of 24
6
M
AINTENANCE
6.1
P
REVENTATIVE MAINTENANCE
•
Quarterly (4 times per year)
o
Visually inspect all wire connections for signs of wear.
•
Every year
o
Inspect top and internal enclosure to ensure no adverse wear due to
environment.
o
Confirm all electrical connections are secure.
o
Ensure calibration and zero point of unit.
6.2
R
ECOMMENDED
S
PARE
P
ARTS
As a minimum Kobelt recommends the following spare parts are on-hand:
Table 4: Recommended Spares
RECOMMENDED SPARES
QTY
ITEM
KOBELT PART #
1
T3-1/4 BULB, 24V* (ANSI Model: 656)
6001-3647
1
T3-1/4 BULB, 12V* (ANSI Model: 193)
6001-3633
* Select the spare bulb based on the desired operating voltage.
It is recommended that any required service work on a Kobelt unit
be performed by a factory authorized service representative. Please
contact the nearest Kobelt authorized distributor for assistance.
