Model 7166 Electric Helm
Kobelt Manufacturing Co. Ltd.
Rev A
mnl7166.docx
4 of 17
1
I
NTRODUCTION
1.1
C
ONTACT
Kobelt Manufacturing Co. Ltd.
8238 129th Street
Surrey, British Columbia
Canada, V3W 0A6
Sales Tel:
Fax:
Email:
Website:
+1-604-572-3935
+1-604-590-8313
[email protected]
www.kobelt.com
This document is intended to clearly present comprehensive product data and provide
technical information to assist the end user in design applications. Kobelt reserves the right,
without notice, to change the design, or construction, of any products and to discontinue or
limit distribution of any products. Kobelt also reserves the right to change, or update, without
notice, any technical information contained within this document.
Kobelt recommends that customers visit our website to check for updates to this Manual.
Once a product has been selected for use, it should be tested by the user to ensure proper
function in all possible applications. For further instructions, please contact our distributors or
visit our website.
1.2
C
OMPLIANT
U
SE
This device is only intended for use by persons trained in operating marine systems.
The installer shall:
•
Only use non-defective products.
•
Check the safety of operation and the condition of the device before each use.
•
Verify that the product is operational at all times and keep it in good working
conditions.
Only Kobelt Manufacturing Co. Ltd. Authorized Dealers or Authorized Technicians are to
repair Kobelt products.
1.3
C
OPYRIGHTS
&
T
RADEMARKS
All product names, logos and brands are property of their respective owners. All company,
product and service names used in this manual are for identification purposes only. Use of
these names, logos, and brands does not imply endorsement.
