3329 Manual
KOBELT MANUFACTURING CO. LTD
Rev A
MNL-3329.docx
3
1
I
NTRODUCTION
1.1
C
ONTACT
Kobelt Manufacturing Co. Ltd.
8238 129th Street
Surrey, British Columbia
Canada, V3W 0A6
Sales Tel:
Fax:
Email:
Website:
+1-604-572-3935
+1-604-590-8313
[email protected]
www.kobelt.com
This document is intended to clearly present comprehensive product data and provide technical
information to assist the end user in design applications. Kobelt reserves the right, without notice, to
change the design, or construction, of any products and to discontinue or limit distribution of any
products. Kobelt also reserves the right to change, or update, without notice, any technical information
contained within this document.
Kobelt recommends that customers visit our website to check for updates to this Manual. Once a
product has been selected for use, it should be tested by the user to ensure proper function in all
possible applications. For further instructions, please contact our distributors or visit our website.
1.2
S
AFETY
1.2.1
Safety Alerts
Throughout this manual, the following symbols, and their accompanying explanation, are used to alert
the user to special instructions concerning a service or operation that may be hazardous if performed
incorrectly or carelessly. The associated risk levels are stated below.
This symbol indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
This symbol indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
This symbol indicates a hazardous situation, which if not avoided, could
result in minor or moderate injury.
This symbol informs the reader of events not related to personal injury
but which there is a risk of damage to property or equipment.
This symbol informs the reader of safety-related instructions or
procedures.
1.2.2
Notice to Installer
Disregarding the following safety measures can result in an accident causing severe injury to personnel
and damage to material assets.
•
Only use the product as directed in this manual.
•
Never put the product into service if there is evidence of visible damage.
•
Never put the product into service before fully completing installation and commissioning.
•
Do not carry out any modifications to the product.
