1-38
［
1.5
AT THE END OF EACH SHIFT
READ THE OPERATOR'S MANUAL
Read, understand and follow the safety messages and instructions in this manual. If these safety messages are not
followed, serious injury or death could occur.
Always make sure the machine is secure and ready to be used for the next shift or moved to another job site.
1.
Park the machine on a firm, level surface.
2.
Lower attachment to the ground.
B
A
1
3.
Pull the control lock lever(1) to the "LOCKED" (up)
position(A) and check all control levers and pedals
have returned to neutral.
4.
Close and secure all windows in place to prevent
water or moisture from damaging any electrical
components.
5.
Remove the key from the key switch and lock all
doors and access panels.
6.
Refill the fuel tank to the full mark to reduce air
volume and condensation (moisture).
This will decrease the possibility of freezing in the
fuel tank, rusting due to moisture and other potential
issues.
7.
Thoroughly clean and inspect the machine. If any
issues are found, always lubricate, repair, or replace
any machine parts and systems prior to restarting
the machine.
8.
If the machine is stored in cold climates, it may be necessary to remove the batteries from the machine and
store them in a warm, well ventilated area. Re-install the batteries before the next start up. This helps prevent
premature battery deterioration.
Copyright©2020 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2YY00041ZE03] [0701CsCshWbYs]
