1-36
［
1.4.4
SAFETY CHECK ON THE PARKING MACHINE
There are risks of creeping, unexpected movement at the time of coming start if the machine is not parked properly.
Park the machine following the safety parking procedures shown below.
ALWAYS PARK MACHINE PROPERLY
1.
Travel machine to a safe location on firm, level
ground.
2.
Lower the attachment to the ground.
If equipped with a dozer blade, lower it to the
ground.
3.
Set the auto acceleration switch to the "OFF"
position.
B
A
1
4.
Pull the control lock lever(1) to the "LOCKED" (up)
position(A).
If not locked, accidental or unintended contact with
the control levers, pedals and other control devices
may result in unexpected and unintended machine
movement.
5.
Turn engine throttle to the low idle position.
6.
Turn the starter switch to the "OFF" position and
remove the key.
Close and lock the windows and the cab door.
Check the windows, doors and all other machine
access covers are locked and secure.
Copyright©2020 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2YY00041ZE03] [0701CsCshWbYs]
