4
9
KOBE
I N D U S T R I A L
POWER TOOLS
SPECIFICATIONS
MODEL: ...................................... DMM3050
ORDER CODE: .................... KBE-268-4220K
MOTOR: ................ 1200W/240V/50/60Hz
ARBOR: ................................ 19mm Weldon
CHUCK SIZE: .........................................
1/2
”
SPEED: ........................................... 595rpm
MAGNETIC ADHESION: .................. 13,000N
WEIGHT: ................................... 13.5kg NET
SIZE: ........... 390(H) x 260(W) x 100(D)mm
DRILLING CAPACITIES:
Core drill ..................................... 12 - 35mm
Twist drill ................................... 1.5 - 13mm
Countersink ................................ 10 - 40mm
CUTTING DEPTH: .............................. 50mm
STROKE: ......................................... 165mm
SOUND PRESSURE (LPA): .......... 109.5 dBA
SOUND POWER (LWA): .............. 107.8 dBA
VIBRATION LEVEL: ......................... 1.5m/s
2
KOBE
I N D U S T R I A L
POWER TOOLS
ELECTRICAL INFORMATION
In the United Kingdom, the
ELECTRICITY AT WORK ACT 1989
requires all portable electrical appliances, if
used on business premises, to be tested by a qualified electrician, using a Portable Appliance Tester (PAT), at
least once a year. The
HEALTH & SAFETY AT WORK ACT 1974
makes owners of electrical appliances
responsible for the safe condition of the appliance and the safety of its operator. If in any doubt about
electrical safety, contact a qualified electrician.
ELECTRICAL SAFETY
An RCCB (Residual Current Circuit Breaker) should be fitted in the mains electricity distribution board. If the
power supply is not protected by an RCCB, it is highly recommended that an RCD (Residual Current Device) is
used with all portable electrical products.
PLUG FITTING
A moulded UK 3 pin plug with ASTA/BS approval is already fitted for your safety.
If it becomes damaged, and needs replacing, cut off the plug and prepare the
wires. Use the following instructions:
a)
Connect the GREEN/YELLOW earth wire to the earth terminal marked either
‘ E’ or with the earth symbol‘ ’.
b)
Connect the BROWN live wire to the live terminal marked ‘ L’.
c)
Connect the BLUE neutral wire to the neutral terminal marked ‘ N’.
d)
After wiring, check there are no bare wires, that all wires have been correctly
connected, that the cable external insulation extends beyond the cable
restraint and that the restraint is tight.
EXTENSION REELS
When a cable extension reel is used it should be fully unwound before being
connected. Use at least 1.5mm
2
section cable or to be absolutely sure use 2.5mm
2
section cable.
Yellow & Green = Earth wire
Cable restraint
UK
ONLY
Brown = Live wire
Blue = Neutral wire
5 amp
fuse
KOBE
I N D U S T R I A L
POWER TOOLS
MAINTENANCE
The drill requires very little maintenance apart from keeping all unpainted surfaces coated in light oil.
Keep the machine clear of swarf which should be disposed of in a proper manner and not put into
domestic refuse bins.
Always inspect and check the set up and adjustments before using the machine.
KOBE
I N D U S T R I A L
POWER TOOLS
SERVICE & REPAIR
A comprehensive repair and service
facility is available through your
local Kobe agent.
KOBE
I N D U S T R I A L
POWER TOOLS
THE ENVIRONMENT
Always dispose of unwanted tools, accessories and packaging materials in an environmentally
friendly manner.
For EU and EEA countries only.
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic Equipment
(WEEE) and its implementation in accordance with national law, electrical goods that have reached
the end of their life must be collected separately and returned to an environmentally compatible
recycling facility.
Do not dispose of electrical goods with domestic waste materials as inappropriate disposal may
cause potential hazards to the environment and human health.
For further information, please contact your local authority or the retailer from whom you purchased
the product.
This product does not contain any restricted substances in concentrations and applications which
are banned by the European RoHS Directive.
KOBE
I N D U S T R I A L
POWER TOOLS
SPARES
For spare parts or servicing please contact your nearest agent. Remember to quote tool model number and
spare part number when ordering spares. The use of other than genuine Kobe replacement* parts may
result in safety hazards, decreased tool performance and increased maintenance. When disposing of
components, etc. ensure that relevant environmental procedures are carried out.
Description
Order Code
Chuck Guard
KBE-298-3783S
Carbon Brushes
KBE-298-9944E
Weldon Adaptor
KBE-298-3785S
Chuck Key
KBE-298-3784S
*
(KOBE recommends the use of
KOBE/KENNEDY replacement chucks)
KBE-268-4220K_Instructions.qxd 29/09/2011 12:36 Page 4
