KoamTac SMARTSLED KDC400 Series, User Manual

Page: 73 / 231

KDC User Manual B
LUETOOTH
73
4. Bluetooth -KDC20/30/200/250/300/350/400
The KDC20/30/200/250/300/350/400 supports HID (Human Interface Device) normal, HID
iOS, SPP (Serial Port Profile) and SPP2.0 profiles. The KDC20i/30i/200i/250i/300i/350i/400i
supports MFi (Made for iPhone/iPad/iPod touch) profiles too. They are compatible with the
following Bluetooth stacks:

BlueSoleil

Broadcom (Widcomm)

Microsoft Windows XP, Vista, 7, and Mobile5.0+

Toshiba
The KDC200/250/300/350’s
Bluetooth
options may be configured by using the KDC menu
and special barcodes. The KDC20/30/400’s Bluetooth options may be configured by using
the PC KTSync and special barcodes.
4.1 Bluetooth Config
Connect Device
The KDC supports both Serial Port Profile (SPP) and Human Interface Device Profile (HID).
The user may choose amongst SPP2.0, SPP (2.1), HID normal, or HID iOS profiles to
communicate with the host device. An additional MFi (Made for iPhone/iPad/iPod touch)
option is available for KDC20i/30i/200i/250i/300i/350i/400i models.
If the BT Toggle option in BT Config is enabled, the user may connect and disconnect the
Bluetooth connection with the host device by pressing the UP and DOWN buttons. It
normally takes 3 seconds to connect and 1 second to disconnect. This is a very useful feature
for iPhone and iPad applications.
The user may also enable and disable the iPhone and iPad soft keyboard instantly by using
this BT Toggle option.chr
The UP button shows the Bluetooth connection status and the DOWN button shows the
time when the KDC is connected via SPP profile.
The user should first un-pair the KDC from the Bluetooth host to change the
Connect Device setting on the scanner to a different Bluetooth profile.
Note