KoamTac SMARTSLED KDC400 Series, User Manual

Page: 68 / 231

KDC User
YOUR
KDC
68
Pair and connect KDC20i/30i/200i/250i/300i/350i/400i and iOS4.0+ in HID
iOS mode
 Users have to disable the MFi option in System > MFi menu and change the
Bluetooth profile to HID-iOS to use HID Bluetooth profiles
.

Users have to RESET the iPhone/iPad/iPod touch in order to change HID to MFi
mode, and vice versa, after removing a previous KDC connection.

KDC with Bluetooth Spec2.1+EDR does not prompt Pin code entry menu.

KDC with Bluetooth Spec. 2.1+EDR stack does not require 4 or 6 digits PIN
digits entry
Follow the below steps in order to pair and connect KDC models for MFi and iOS4.0 in HID
mode.
1.
Go to the KDC System > MFi menu
2.
Change MFi option to Disabled
3.
Change ConnectDevice to HID iOS mode
4.
Remove previous KDC connection and RESET the device
5.
Change KDC to Pairing mode
6.
The iPhone/iPad/iPod touch will find a new device as Keyboard
7.
Click
Keyboard
device
iOS Soft Keyboard Toggling using BT Toggle Option
Users need to select the option to use this feature in BT Config>BT Toggle. Press the DOWN
button to toggle a soft keyboard.
Note