Scope of functions
RF/TP media coupler/repeater | Order no. 5110 00 | 51103300
Page 15 of 42
6
Scope of functions
–
Use as media coupler in the function of area or line coupler (depending on the
physical address)
–
Use as a segment coupler (ETS 6.0.5 or higher) with ETS application program
"Media coupler / repeater 902211".
–
Use as KNX RF repeater possible in RF lines with ETS application program
"Media coupler / repeater 902011".
–
Influence on forwarding of group telegrams (routing) by filter function in media
and segment coupler operation.
–
Support of the full address range (groups 0-31) for filter function
–
Forwarding of group telegrams (TP -> RF, RF -> TP) parameterizable
–
Forwarding of physically addressed telegrams (TP -> RF, RF -> TP) paramet-
erizable
–
Forwarding of broadcast telegrams (TP -> RF, RF -> TP) parameterizable
–
Telegram repetitions in case of transmission errors for group, broadcast and
physically addressed telegrams can be set on the TP side
–
Telegram confirmation for group and physically addressed telegrams can be
separately configured on the TP side
–
Configuration lock can be set (programming only via TP or RF)
–
Status LED to display device statuses
–
Conversion and generation of RF system broadcast telegrams
–
Support of extended frames
–
Safe-state mode to stop the application program (e.g. if the device does not
function properly due to errors in the project design or during commissioning)
–
Function for reset to delivery state
