Motion Detector PIR900 V3.3
©
KNOP
Elektronik A/S
Fabriksvej 20
DK-7600 Struer
knop.dk
+45 97840444
4
Intended use
PIR900 is a transmitter designed to send codes to a KNOP 900 series wireless receiver.
The transmission takes place when a person moves over the edge of the bed or when the person
walks on the floor. Please note the interval described in the section
"Checking the coverage area".
PIR900 can also detect the opening and closing of a door using the magnet provided.
Once PIR900 is in place, it must be tested.
Stand outside the activation area. Enter the activation area and see if the LED "IT" flashes on the
front of PIR900 each time it is activated.
Commissioning
Once PIR900 is in place, it needs to be tested.
Stand outside the activation area. Enter the activation area and see if the LED
"IT"
flashes on the
front of PIR900 each time it is activated.
