©
KNOP
Elektronik A/S
Fabriksvej 20
DK-7600 Struer
knop.dk
+45 97840444
8
Programming/encoding of bed guard
The bed mat is placed in the bed under the sheet or bed mattress and connected to TX901 transmitter.
You can attach the bed mat with tape, so that it does not move.
CT901R is placed in an electrical socket and MK204 relay cable is connected to the existing alarm system.
The clock and any light must be set if you wish to use it.
Co-encoding of TX901 and CT901R
Select "Main menu" => "Transmitters" => "Learn new" press Ent and activate the bed mat.
Then you can choose different settings:
Light: move the green arrow downwards to " No light " and press Ent. Then use the arrow buttons to change the
value.
The "No light" light never comes on.
"Light, time" means that the light turns on in the time period selected in Time Control, page 6.
"Light, always" the light is always on when the user leaves the bed.
The menu can also be accessed under "Main menu" => "Transmitters"
Bed, timer:
Here you can set how long the user can be out of bed before the bed alarm sounds.
Move the green arrow to "Bed, timer" and press Ent.
Select the value with the arrow buttons and confirm with Ent.
Return to the Start menu by pressing Esc.
Sender nr. 1
TX-900-1
Batt.: 2.83V
Bed guard
→
Light, time
↓
Alarm, time: 2
Sender nr. 1
↑
Bed guard
Light, time
↓
Alarm, time: 2
→
Bed, timer
↓
Bedtimes
