Lens Shift
To access the lens shift controls:
Loosen the two screws located at the
rear side and underneath of the projec-
tor as shown in the figure at the right.
Slide the center portion of the top cover
backward to expose the holes for lens
shift.
Vertical Lens Shift:
To shift the projected
image vertically, insert the provided hex
wrench into the hole at the top of the pro-
jector (directly above the lens). Then, turn
the wrench as shown to shift the lens in the
desired direction.
Horizontal Lens Shift:
To shift the project-
ed image horizontally, insert the provided
hex wrench into the hole at the top of the
projector. Then, turn the wrench as shown
to shift the lens in the desired direction.
1.
2.
Vertical Lens Shift
Horizontal Lens Shift
insTallaTion
