—
4
—
I
TEM
L
ABEL
D
ESCRIPTION
S
EE PAGE
1.
AC IN
Connect the POWER cable
11
2.
3D SYNC
Connect the 3D IR glasses transmitter
(Note: 3D IR glasses only)
3.
HDMI 1
Connect the HDMI cable from a HDMI device
4.
HDMI 2
Connect the HDMI cable from a HDMI device
5.
(USB)
Connect the USB cable from a computer
6.
VGA IN
Connect the RGB cable from a computer
7.
RS-232C
Connect RS-232 serial port cable for remote control
8.
COMPONENT
Connect the Component cable from a component device
9.
USB POWER
For USB charge support DC 5V
10.
Kensington Lock
Secure to permanent object with a Kensington® Lock
39
11.
VIDEO IN
Connect the COMPOSITE cable from a video device
12.
AUDIO IN (L and R)
Connect the AUDIO cable from a audio device
13.
S-VIDEO
Connect the S-VIDEO cable from a video device
14.
AUDIO IN
Connect an AUDIO cable from the audio device
15.
AUDIO OUT
Connect an AUDIO cable to audio amplifier
16.
DC 12V TRIGGER
When connected to the screen through a commercially available
mono
cable, the screen deploys automatically on start up of the projector. The
screen retracts when the projector is powered off (see notes below).
DLP Projector—User’s Manual
Rear view
1
2 3 4 5 6 7 8
9 10
16 15 13
14 12
11
system
Note:
y
To use this feature, you must plug in the connector before turn on/off the projector.
y
Use only a MONO 3.5mm plug.
A stereo plug may not work or give a wrong voltage.
y
Do not use this jack for anything other than intended use.
