KNIGHT SMART CART OPERATION MANUAL
SECTION 2
INSTALLATION
9
Step 2: Test Cart Movement
Test the Smart Cart movement by moving the analog thumb lever on the control handle to the right and left.
The fixture should move upward and downward freely. The speed of the movement will be directly
proportional to the amount the thumb lever is moved past its center or rest position.
Step 3: Sequence of Operation
NOTE
As required, engage/disengage the caster brakes to prevent the cart from
movement.
1. Position cart until the fixture is at a proper height to engage the part by use of the UP/DOWN
control pendant. If necessary, engage the foot brake to prevent the cart from moving.
2. Ensure that cart has engaged part properly and transfer part to drop-off position.
Note: If the foot brake was engaged in step 1, release the brake before moving the cart.
3. Use the thumb
lever
to position part at a proper height for the drop-off location.
4. Unload the part from cart. If necessary, engage the foot brake to prevent the cart from moving.
5. Remove fixture from drop-off location and return to starting location.
Note: If the foot brake was engaged in step 4, release the brake before moving the cart.
6. Repeat operation.
